The TE110P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card that supports all the functionality of our quad T1/E1/J1 card. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk Open Source PBX/IVR, which reliably routes the channels to their designated locations. This eliminates the need for an external router.

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, one can easily connect multiple PCs equipped with the TE110P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE110Ps to each individual PC. Add additional cards as you need them for your expanding applications.

Data Modes:

• Cicso HDLC
• HDLC
• PPP
• Multilink PPP
• Frame Relay

Voice Modes:

• PRI CPE & PRI NET
• NI1
• NI2
• EuroISDN
• 4ESS (AT&T)
• 5ESS (Lucent)
• DMS100
• E&M
• Wink
• Feature Group B
• Feature Group D
• FXO & FXS
• Ground Start
• Loop Start
• Loop Start with Disconnect Detect

The TE110P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

The TE110P uses a universal PCI slot (use with a 3.3 or 5.0 volt PCI slot).

The TE110P is certified for Europe, North America, and Australia.

Based in high-tech Huntsville, Alabama, Digium is the creator and primary developer of Asterisk, the industry's first Open Source PBX. Used in combination with Digium's PCI telephony interface cards, Asterisk offers a strategic, highly cost-effective approach to voice and data transport over TDM, switched, IP, and Ethernet architectures.

Digium solutions reduce the costs of traditional TDM and VoIP implementations through Open Source, standards-based software and innovative hardware solutions, including legacy PBX, IVR, Auto-attendant, and next-generation gateways, media servers, and application servers.

Digium hardware supports traditional voice protocols, including PRI, RBS, FXS, FXO, E&M, Feature Group D, Groundstart, and Loopstart. Data protocols include PPP, Cisco HDLC, and Frame Relay. For packet voice, Asterisk supports IAX (Inter-Asterisk eXchange), SIP, MGCP, Skinny, and H.323 VoIP protocols.

Digium provides a highly refined selection of quality hardware and software products, developed and implemented using innovative engineering techniques (primarily Open Source development). A full range of professional services complement these product lines, including consulting, technical support, and custom software development services. The Open Source communications revolution is here, and Digium is leading the way.